3D Models
Import 3D models, navigate the scene, set up lights and camera, play model animations and set 3D viewport preferences.
These docs cover Dasca 2.3.
3D models open in Effects mode. The model is rendered live and every effect in the chain is applied on top of the rendered view, so you can orbit the camera and see the result update.
Importing a model
Open the app menu (DASCA logo) and choose Import Media... (Ctrl+I), or drag a model file onto the window.
Supported formats: glTF (.gltf), GLB (.glb) and OBJ (.obj).
When a model loads, the canvas is set to 1080 x 1080. You can change the canvas size in the Adjustments panel. See Canvas and Adjustments.
Navigating the scene
| Input | Action |
|---|---|
| Left-drag | Orbit around the model |
| Right-drag | Pan |
| Middle-drag | Move the camera closer or further |
| Scroll wheel or trackpad pinch | Zoom |
Ctrl+= / Ctrl+- | Zoom in / out |
R | Reset the camera |
3 | Hide / show the Scene panel |
View keys (numeric keypad)
| Key | View |
|---|---|
Numpad 1 | Front |
Ctrl+Numpad 1 | Back |
Numpad 3 | Right |
Ctrl+Numpad 3 | Left |
Numpad 7 | Top |
Ctrl+Numpad 7 | Bottom |
Numpad 9 | Flip to the opposite side |
Numpad 5 | Switch between perspective and orthographic |
R and 3 can be changed in Preferences > Shortcuts.
3D toolbar
A floating toolbar sits over the 3D canvas. Drag it by an empty area to move it. From left to right:
| Button | What it does |
|---|---|
| Ground grid | Shows a grid under the model. |
| Wireframe | Draws the model as a wireframe. |
| Textures | Turns model textures on or off. Off shows a neutral clay preview. |
| Lights | Shows or hides the light rig card (see below). |
| Lighting preset | Picks a lighting setup. See Lighting presets. |
| Scene background | Color behind the model. |
| Perspective / Orthographic | Camera projection. Numpad 5 toggles. |
| Clip list and Animation controls | Shown only when the model has animations. See Model animations. |
| Scene settings | Opens the Scene panel. |
Toolbar choices are remembered as your defaults for the next 3D session.
Scene panel
Click Scene settings or press 3 to open the Scene panel.
Light
Choose Key, Fill or Rim with the tabs, then set the direction of that light.
| Control | Range | What it does |
|---|---|---|
| Azimuth | -180° to 180° | Direction of the light around the model. |
| Elevation | about -83° to 89° | Height of the light. Negative values light the model from below. |
Ambient
| Control | Range | What it does |
|---|---|---|
| Ambient color | Color | Color of the soft light that fills the whole scene. |
| Intensity | 0 to 2 | Strength of the ambient light. |
Render
| Control | Options / Range | Default | What it does |
|---|---|---|---|
| Anti-alias | Off, MSAA, FXAA, SMAA | FXAA | Smooths edges. MSAA uses GPU multisampling, FXAA and SMAA are post-process. Also used in image and video export. |
| Sampling | 1x to 2.5x | 2.5x | Renders at a higher resolution for cleaner edges, in the viewport and in export. Shows Off when Anti-alias is Off. |
Camera
| Control | Range | Default | What it does |
|---|---|---|---|
| FOV | 20° to 120° | 75° | Field of view. Shown for the perspective camera. |
| Size | 0.5 to 10 | 2 | Scale of the view. Shown for the orthographic camera. |
Below the camera controls are view buttons: Front, Right, Top, Back, Left, Bottom, and Reset view.
Light rig
The scene uses three lights: Key (main light), Fill (softens shadows on the other side) and Rim (from behind, outlines the model). Click Lights in the toolbar to show the light rig card in the corner of the canvas.
- Pick Key, Fill or Rim with the tabs. Each tab shows the light color.
- The shaded ball previews the lighting from the current camera angle. Each light is a dot: a filled dot is in front of the model, a hollow dot is behind it.
- Drag a dot to move that light. Drag past the edge of the ball to move the light around to the back. Click an empty spot on the ball to place the selected light there.
- Hold
Shiftwhile dragging for fine control. PressEscto cancel the drag. - The card shows the azimuth (Az) and elevation (El) of the selected light, an intensity slider (0 to 5) and a color swatch.
Changing a light switches the lighting preset to Custom. Your custom lighting is kept for the next 3D session.
Lighting presets
Pick a preset from the Lighting preset menu in the toolbar. Each preset sets the color, intensity and direction of the key, fill and rim lights and the ambient light.
| Preset | Look |
|---|---|
| Studio (default) | Warm key, cool fill, neutral rim. Balanced all-round setup. |
| Dramatic | Strong warm key, very little fill, blue rim, dark ambient. |
| Outdoor | Bright high key with sky-blue fill and ambient. |
| Soft | Low contrast, bright ambient, gentle shadows. |
| Product | Clean white key with a strong rim, for objects on display. |
| Golden Hour | Low orange key and warm fill. |
| Moonlight | Cool blue key and rim, dark scene. |
| Neon | Pink key, blue fill and green rim on a dark scene. |
| Noir | Hard key light, almost no fill or ambient. |
| Overcast | Even, diffuse light with soft shadows. |
| Custom | Your own setup, created when you change a light. |
Wireframe, grid and textures
- Wireframe shows the mesh structure.
- Ground grid helps you judge the model position and camera angle.
- Textures off replaces all materials with a neutral clay material, which is useful to judge form and lighting.
Model animations
If a model contains animation clips, the toolbar shows a clip list and an Animation controls button. The Animation panel has:
| Control | What it does |
|---|---|
| Play / Pause | Plays the selected clip. |
| Clip | Chooses which animation clip plays. |
| Timeline | Scrubs through the clip. |
| Speed | Playback speed, 0.1x to 2x. |
| Loop | Repeats the clip. |
A scene with model animations can be exported as video. Video export is also available for 3D when signals are connected to effect sliders. See Video Export.
3D Viewport preferences
Preferences > 3D Viewport sets the defaults for new 3D sessions. Live camera posing and lighting stay in the Scene panel.
| Setting | Options / Range | Default |
|---|---|---|
| Background | Color | Black |
| Lighting preset | The presets listed above | Studio |
| Camera | Perspective, Orthographic | Perspective |
| Field of view | 20° to 120° (Perspective) | 75° |
| Ortho size | 0.5 to 10 (Orthographic) | 2 |
| Anti-alias | Off, MSAA, FXAA, SMAA | FXAA |
| Sampling | 0% to 100% (hidden when Anti-alias is Off) | 100% |
| Toolbar on hover | On/Off. Shows the 3D toolbar only while the pointer is over the canvas. | Off |
| Playback speed (Animation defaults) | 0.1x to 2x | 1x |