Get Dasca

Docs

Learn Dasca, from your first project to node graphs.

Node / Sound and Oscilloscope

Sound and Oscilloscope

Play, make and shape sound in DASCA's Node mode, draw it on a realistic oscilloscope, turn lines and text into sound, and react to music.

Note

These docs cover Dasca 2.3.

Node mode treats sound as something you can see. Sound nodes play and make sound, sound effects shape it, and the Oscilloscope draws it with an electron beam on a glowing screen. Sound wires and sockets have the Audio type.

Where sound comes from

NodeSound
AudioA sound file, or the sound of a video file, played with the timeline. It also outputs the level, bands and beats of the file as values (see Music and beats).
OscillatorTwo tones, one for each ear. The right ear runs at Right ratio times the left one, with Right phase (deg), so the scope draws Lissajous figures.
Path to SoundTurns lines and points into stereo sound that draws them on the scope. See Drawing with sound.
MicrophoneLive sound from a microphone or another audio input. See Microphone.
NDI InLive sound that comes with an NDI source. See NDI.

Oscillator and Path to Sound also have a Notes input: wire the Notes output of a MIDI File or MIDI In into it, and they play the notes and chords.

Shaping sound

NodeWhat it does to the sound and its drawing
Sound CopiesDraws the figure several times per cycle, in a Row, Column, Grid or Ring, at the same pitch.
Sound CrushSnaps the beam to a Grid, Rings or Spokes, for a stepped, digital sound.
Sound EchoAdds fading repeats, so each drawing lingers.
Sound ToneLow pass softens the sound and rounds the drawing; High pass sharpens it.
Sound WarpSwirl, Bulge, Ripple or Wave the beam, which changes the drawing and the sound together.
Sound MixMixes up to four sounds into one signal, with a level for each, so one scope draws them together.

Hearing the sound

Every node that makes or shapes sound has Play sound and Volume (dB).

  • Files and sounds made in the graph play while the timeline plays and follow the playhead.
  • Microphone and NDI In play live, all the time, while their Play sound is on. It is off by default.
  • In a chain of sound nodes, you hear only the end of the chain, so nothing plays twice. Earlier nodes in the chain show heard at chain end next to Play sound.
  • Sound effects cannot delay live sound. In a chain that starts at a Microphone or NDI In, the effects show live input, sources play on their own: they still change the drawing, and you hear the live input through its own Play sound.

The video formats of the export include the sound of Audio nodes and the sound made in the graph. See Node export.

The oscilloscope

The Oscilloscope draws the sound wired into it, like a real analog scope with a phosphor screen.

Mode chooses how the beam moves:

ModeThe beam
X-YThe left channel moves the beam left and right, the right channel up and down. Two tones draw Lissajous figures, and Path to Sound draws its shapes.
Mid-SideThe same, turned by 45 degrees: sound that is the same in both channels draws a vertical line.
TimeThe classic wave over time. Time/div (ms) sets the time per grid division, Channels shows Left, Right or Both (apart by Spacing (div)), and the trigger settings (Trigger level, Trigger slope, Trigger source, Trigger, Holdoff (ms)) keep the wave still.

The look of the screen:

SettingWhat it does
PhosphorThe screen coating, with its own color and afterglow: P31 green, P1 green, P2 blue green, P7 blue and yellow, P11 blue, P39 long green, P19 orange or P4 white.
Intensity, FocusHow bright and how sharp the beam is.
Size, Position X (div), Position Y (div)The size and position of the drawing.
Z inputLets a sound with a brightness channel, such as the sound of Path to Sound, dim the beam, so the jumps between shapes stay dark.
Trace noise (div)A little jitter on the beam.
Storage (sec)How long the trace stays on the screen.
Glow, HalationLight around the trace and in the glass.
GraticuleThe measuring grid: Off, Internal or External, lit by Scale light.
Room lightLight falling on the screen from the room.
Zoom, Exposure, Shutter (frame)How the camera looking at the screen frames and exposes it.
GlassClean, or Worn with Wear.
BackgroundScreen, or Transparent to lay the trace over something else.

Drawing with sound

Path to Sound turns elements into a stereo sound that, on an X-Y scope, draws them. Wire any lines or points into it, for example:

  • Text with Drawn as set to Single line, through its Outline output, to write words,
  • the Outline of Shape, SVG Shape or Lottie Shape,
  • 3D Lines, for a 3D scene drawn in lines,
  • Contours or Trail, or any other elements.
SettingWhat it does
Pitch (Hz)How many times per second the whole drawing is traced, which is also the pitch you hear.
Size, FitThe size of the drawing, fitted to the Drawing or to the Canvas.
OrderShortest path reorders the lines for the shortest travel; As given keeps their order.
JumpsBlanked hides the beam while it jumps between lines; Visible shows it.
BrightnessEven, or From value to dim the beam by each element's value, down to Lowest brightness.
Draw start, Draw lengthDraw only part of the path. Animate them to write the drawing on.
LevelHow loud the sound is.

Then add sound effects after it, and an Oscilloscope at the end.

Seeing sound in other ways

  • Spectrum draws the sound as Bars, a Ring, a Line or a Strip, and outputs the bar tips as elements.
  • Audio Analysis turns any sound into values: Level, Bass, Mid, Treble, Beat, Onset and Count.
  • NDI Out sends the sound wired into its Sound input along with the picture.