Get Dasca

Docs

Learn Dasca, from your first project to node graphs.

Effects / Keyframes and Timeline

Keyframes and Timeline

Animate effect settings with keyframes, edit them in the timeline, set easing and custom curves, and export the animation as video.

Note

These docs cover Dasca 2.3.

Keyframes let effect settings change over time. You set a value at one point in time and another value later, and DASCA animates between them. You add keyframes in the effect's settings panel and edit their timing and easing in the timeline.

How keyframes work

  • A keyframe stores the value of one control at one moment.
  • Between two keyframes the value moves from the first value to the second, shaped by the easing of the first keyframe.
  • Before the first keyframe the control keeps the first value. After the last keyframe it keeps the last value.
  • Keyframe times snap to a grid of 60 frames per second.
  • Each effect has its own keyframes. In a chain, every chain effect has its own set.
  • Keyframes are stored with the project.

Adding and removing keyframes

Every control that can be animated has a small diamond to the left of its row in the settings panel:

DiamondTooltipMeaning
Faint, shown on hoverAnimateThe control is not animated yet. Click to add the first keyframe at the playhead.
OutlineAdd keyframeThe control is animated, but there is no keyframe at the playhead. Click to add one with the current value.
FilledRemove keyframeThere is a keyframe at the playhead. Click to remove it.

Adding a keyframe opens the timeline. When you remove the last keyframe of a control, the control stops being animated and keeps that value.

For rows that hold two values (an X / Y pair such as Center, or the mask Range), one diamond keys both values together.

To animate a control, a simple workflow is:

  1. Move the playhead to the start and click the diamond next to the control.
  2. Move the playhead to a later time.
  3. Change the value. With Auto key on, a new keyframe is added automatically.

What can be keyframed

Kind of controlKeyframedHow it animates
SlidersYesSmoothly, with easing.
ColorsYesSmoothly, blended in a perceptual color space.
X / Y pairsYesSmoothly, both values together.
Selects and togglesSomeThey switch to the new value at the keyframe, without easing. Typically style, mode and shape selects can be keyframed.
Layer: Opacity, BlendYesOpacity smoothly, Blend switches.
Mask valuesYesType and Invert switch, the sliders animate smoothly.

If a control has no diamond, it cannot be keyframed. The mask on/off switch, the effect's on/off state and the Adjustments popover are not keyframed. See Layers and Masks for the layer and mask values.

The timeline

Opening the timeline

The timeline bar at the bottom of the canvas holds the zoom readout, a Play button and the Open timeline button. In video projects it also has Enable loop / Disable loop and Mute / Unmute. Click Open timeline to show the timeline, and Close timeline to hide it. Drag the top edge of the timeline to change its height.

If no control is animated yet, the timeline shows "Click the diamond next to a setting to animate it."

Layout

  • Left column: one group per effect, with a row for every animated control. Click a group name to select that effect in the chain. Use the arrow next to a group name to collapse or expand it. Each control row has Previous keyframe and Next keyframe arrows and a diamond to add or remove a keyframe at the playhead.
  • Middle: the time ruler, the playhead and the keyframes. Click or drag in the ruler to move the playhead.
  • Right column: the value of each control at the playhead. Drag a number left or right to change it (Shift for fine steps), or click it to type. Toggles switch with a click. A change here writes a keyframe at the playhead.

Header controls

Control (tooltip)What it does
Play / PausePlays or pauses the animation.
Time / durationShows the playhead time. In image and 3D projects, click the duration (tooltip Duration (seconds)) to type a new length.
Loop on / Loop offWhether playback repeats. Shown in image and 3D projects.
Auto keyWhen on, changing an animated control adds a keyframe at the playhead.
SnapWhen on, the playhead and keyframes snap to nearby keyframes, the playhead, the start and the end.
Zoom timeline sliderZooms the time axis.
Close timelineHides the timeline.

The default duration is 2 seconds. You can set 0.1 to 600 seconds. Loop is on by default.

Auto key

Auto key is on by default.

  • On (tooltip "Auto key on: changes add keyframes"): when you change an animated control, a keyframe is added or updated at the playhead.
  • Off (tooltip "Auto key off: changes only update existing keyframes"): a change updates the keyframe only if one already exists at the playhead. Otherwise the change is only a preview, and it is dropped when the playhead moves.

Controls that are not animated always change normally, whatever the Auto key state.

Snap

Snap is on by default. Hold Shift while dragging to bypass it. When Snap is off, holding Shift turns snapping on for that drag.

Editing keyframes

ActionHow
Select a keyframeClick it. The playhead moves to it and its effect is selected, so the next change you make updates that keyframe.
Add or remove from the selectionShift+click.
Select severalDrag a box in an empty area of the lanes. Hold Shift to add to the selection.
Select allCtrl+A
Clear the selectionEsc
Move keyframesDrag a selected keyframe. All selected keyframes move together. A keyframe cannot pass its neighbors on the same row. When you let go, the playhead moves to the keyframe you dragged.
Jump to a keyframeDouble-click it.
Move all keyframes of an effectDrag the bar on the effect's group row (tooltip "Drag to move all keyframes").
Stretch or compress timingDrag the start or end edge of the group bar ("Drag to stretch from the start" / "Drag to stretch from the end").
Copy and pasteCtrl+C copies the selected keyframes. Ctrl+V pastes them at the playhead, keeping their spacing.
DeleteDelete or Backspace.

The keyboard actions in this table work after you click inside the timeline. On macOS, use Cmd for Ctrl.

Easing

Easing sets how the value moves from one keyframe to the next. Each keyframe stores the easing for the segment that follows it. New keyframes take the easing of the keyframe before them; the first easing is Ease In Out.

To change it, click the line between two keyframes (its tooltip shows the current easing, for example "Ease In Out. Click to change"). A popover opens with these presets:

EasingWhat it does
LinearConstant speed.
Ease InStarts slowly and speeds up.
Ease OutStarts fast and slows down.
Ease In OutSlow at both ends, fast in the middle.
HoldKeeps the value until the next keyframe, then jumps. Shown as a dashed line.

If the keyframe you click is part of a selection, the easing is applied to every selected keyframe.

Custom curve

Below the presets is a curve editor. Drag its handles to shape your own curve; the easing then becomes Custom. The curve editor is not available for Hold ("No curve").

Selects and toggles always switch at the keyframe and have no easing.

ShortcutAction
SpacePlay / pause the keyframe animation. In video projects, and in 3D scenes with model animation, Space plays those instead.
JGo to previous keyframe
KGo to next keyframe
Left / Right arrowStep back / forward one frame
Shift+Left / Shift+RightStep back / forward ten frames
HomeGo to start
EndGo to end
Alt+KToggle Auto key
Alt+SToggle Snap
= / -Zoom the timeline in / out (after clicking in the timeline)
\Fit the whole timeline (after clicking in the timeline)
Alt+scrollZoom the timeline at the cursor (Ctrl+scroll and pinch also work)

On macOS, use Option for Alt and Cmd for Ctrl. You can change these shortcuts in Preferences > Shortcuts. J and K jump between keyframes of all animated controls.

Keyframes in video projects

In a video project the timeline follows the video. Its length is the video's length and cannot be typed in, and the playhead moves with video playback. Use the loop button in the timeline bar to loop the video.

Exporting animation

When the project has keyframes, video export becomes available even for a still image, and Export opens with video selected. In image projects the export duration starts at the timeline duration. If you export a longer clip, the animation repeats when Loop is on and holds its last values when Loop is off.

In video projects, keyframes follow the video's time during export.

See Video Export for formats and settings.