Get Dasca

Docs

Learn Dasca, from your first project to node graphs.

Effects / Distortion Effects

Distortion Effects

Every Distortion effect in DASCA, from Pixel Sort and Warp to Fisheye and Scan Tear, with styles, controls, ranges and defaults.

Note

These docs cover Dasca 2.3.

Distortion effects move, bend, break or rebuild the pixels of your picture instead of only changing their color. These are the effects you see when you pick Distortion in the category filter of the Effects library. All sliders on this page can be keyframed, see Keyframes and Timeline.

Animation controls

Many effects on this page move on their own. Most of them share the same two controls:

ControlRangeDefaultWhat it does
AnimateOn/OffOnPlays the effect's own motion over time.
Time0 to 1200Shown only while Animate is off. Picks the frozen moment of the motion, so you can choose a still frame or keyframe the motion yourself.

On video, Keyframe Loss, Echo Tunnel and Warp follow the video clock, so their motion stays in step with playback and export. Pixel Sort has its own Animate switch with a rate control instead of Time, described in its section.

Reset in the effect settings restores the defaults but keeps the current style selected, for example the Style of Keyframe Loss, Scan Tear and Fisheye, the Waves of Wave Surface or the Mode of Fluid and Warp.

Several effects have on-canvas handles for centers, angles and cameras. See Transform and Gizmos.

Keyframe Loss

Simulates a video stream that lost its keyframes: areas of the picture lock up and keep dragging old pixels across the frame instead of updating. It builds on its own previous frames, so it looks best on video or with Animate on.

Styles

StyleWhat it looks like
Blocks (default)Square areas lock and slide apart.
MeltSoft areas flow like liquid.
BloomPixels stream out from a few points, like a repeated motion frame.

Parameters

ControlRangeDefaultWhat it does
StyleBlocks, Melt, BloomBlocksKind of corruption (see above).
Intensity0 to 10.7How much of the picture locks up and smears.
Size30 to 15048Size of the corrupted areas.
Drift0 to 10.35How fast corrupted areas drag their pixels away.
Churn0 to 10.4How often each area changes. Low values let areas melt for a long time before they recover.
Blend0 to 11Blend between the live picture and the corrupted stream.
Speed0 to 41How fast the corruption evolves. 0 freezes it in place.
Seed0 to 1000Changes the layout of the corruption.
Animate / TimeSee Animation controls.

Echo Tunnel

Stacks many copies of the picture inside each other to build an endless tunnel you can fly through. Use it for hypnotic loops, title backgrounds and music visuals. It only animates while Fly or Spin is not 0.

Parameters

ControlRangeDefaultWhat it does
Echoes2 to 4824How many copies of the picture make up the tunnel.
Frame Size0.1 to 10.55Size of the front copy.
Spacing0.02 to 10.25How much bigger each copy is than the one in front of it.
Twist-45 to 456Turns each copy a little more than the one in front, in degrees.
Drift X-0.1 to 0.10Moves each copy sideways, bending the tunnel.
Drift Y-0.1 to 0.10Moves each copy up or down, bending the tunnel.
Center X-0.5 to 0.50Moves the tunnel's center left or right.
Center Y-0.5 to 0.50Moves the tunnel's center up or down.
ShapeRectangle, CircleRectangleOutline of each copy.
MirrorNone, Left to Right, Top to Bottom, BothNoneMirrors the picture inside every copy.
Fade0 to 10.12How much darker each copy gets toward the outside.
Color Shift-1 to 10Shifts the colors a little more on every copy.
Prism0 to 10Splits red and blue apart on the outer copies.
See ThroughNone, Dark Areas, Bright AreasNoneMakes parts of every copy clear so the copies behind show through.
Key0 to 10.3Shown when See Through is Dark Areas or Bright Areas. How much of the picture becomes clear.
Border0 to 10Draws a frame around every copy.
Border ColorColorWhiteColor of the frames.
Fly-1 to 10.3Flies through the tunnel. Negative flies backward, 0 keeps it still.
Spin-1 to 10Turns the whole tunnel.
Animate / TimeSee Animation controls.
BackgroundColorBlackColor beyond the last copy.
Mix0 to 11Blend between the original and the effect.

On-canvas handles: Center (point) and Drift (arrow from the center).

Wave Surface

Lays the picture on a 3D surface of moving waves and films it with a virtual camera and light. Use it for flowing fabric, water or terrain looks.

Parameters

ControlRangeDefaultWhat it does
WavesNoise, Sine, RidgesNoiseShape of the waves the picture is laid on.
OutsideStretch, Empty, Mirror, RepeatMirrorWhat shows past the edges of the picture.
Height0 to 10.3How tall the waves are.
Frequency0.1 to 51.5How many waves fit across the surface.
Detail1 to 52Adds smaller waves on top of the big ones.
Seed0 to 1000Changes the layout of the waves.
Speed0 to 30.5How fast the waves move.
Flat Edges0 to 10Flattens the surface toward its edges.
Tilt0 to 8535Tips the camera down toward the surface.
Roll-45 to 450Rotates the camera around its view.
Camera Height-1 to 20Raises or lowers the camera.
Zoom0.3 to 31Moves the camera closer to the surface.
Near Fade0 to 10Fades out the part of the surface closest to the camera.
Far Fade0 to 10Fades out the far part of the surface.
Lighting0 to 10030Strength of the light and shadow on the waves.
Gloss0 to 1000Makes the shine tighter and glossier.
Highlights0 to 10015Brightness of the shine on wave tops.
Light X-1 to 10.4Light direction, left to right.
Light Y-1 to 1-0.6Light direction, front to back.
Light Z-1 to 10.7Light direction, from above.
Animate / TimeSee Animation controls.
Light ColorColorWhiteColor of the light.
BackgroundColorBlackColor behind the surface.

On-canvas handles: Camera (orbit for Tilt, Roll and Zoom) and Light (light direction).

Scan Tear

Turns the picture into a rough 3D scan mesh. Brightness is read as distance, and sharp changes in brightness tear the mesh into cliffs that stretch the picture into long smears. Use it for broken photogrammetry, data-scan and fly-over looks.

Styles

Choosing a style sets every control to match it. You can change anything afterward.

StyleWhat it looks like
Clean ScanFine, smooth mesh with only light tearing and no holes.
Torn (default)Strong cliffs that stretch the picture into smears, a few holes and spikes, light depth fog.
ShatteredThe surface splits into separate triangles with gaps, more holes and ragged edges.
InsideThe camera is pushed into the scan with a wide lens, looking across the surface into fog.
Mesh ViewLarge triangles with flat shading and visible wireframe edges.

Parameters

Defaults below are the values of the Torn style.

ControlRangeDefaultWhat it does
StyleClean Scan, Torn, Shattered, Inside, Mesh ViewTornKind of scan (see above).
Polygon Size3 to 648Size of the scan's triangles, in pixels at 1080p. Bigger gives a rougher, low detail scan.
Irregular0 to 10.6Shakes the triangle corners so the mesh looks scanned instead of a perfect grid.
Depth0 to 20.8How far the picture is pushed out into 3D.
RaiseBright Areas, Dark AreasBright AreasWhich parts of the picture come forward.
Tear0 to 10.75Turns soft changes in brightness into cliffs. Triangles across a cliff stretch the picture into long smears.
Layers1 to 83Shown when Tear is above 0. Number of flat depth levels the picture is split into. The cliffs between them are where the picture tears.
Smoothing0 to 4024Smooths the depth before the mesh is built, in pixels at 1080p. Lower keeps small detail, higher gives calm surfaces.
Roughness0 to 10.25Lumpy, noisy surface like a scan of rubble.
Spikes0 to 10.02Stray points that shoot out of the surface and drag the picture with them.
Holes0 to 10.06Missing pieces where the scan had no data: steep cliffs and random patches drop out.
Ragged Edges0 to 10.35Eats into the borders of the scan with an uneven, broken edge.
Shatter0 to 10Splits the surface into separate triangles with gaps between them.
Collapse0 to 10Breaks the scan apart piece by piece until nothing is left. Animate it with keyframes.
Seed0 to 1000Changes the random layout of corners, spikes, holes and pieces.
Facets0 to 10.25Flat shading per triangle, so the mesh shows its polygons.
Light Angle0 to 360135Shown when Facets is above 0. Direction the light comes from for the facet shading.
Wireframe0 to 10Draws the triangle edges over the scan.
Wire ColorColorWhiteShown when Wireframe is above 0. Color of the triangle edges.
Turn-180 to 1800Turns the scan left and right.
Tilt-85 to 850Tips the scan toward or away from the camera.
Roll-45 to 450Rotates the camera around its view.
Zoom0.3 to 30.8Camera distance.
Lens15 to 12050Field of view. Wide lenses exaggerate depth and stretch, the frame stays filled.
Push In0 to 10Moves the camera into the scan, through the surface.
Travel-1 to 10Slides the scan under the camera, for fly-over shots.
Auto Orbit-1 to 10Swings the scan slowly left and right around Turn. Higher is faster, negative starts the other way.
Float0 to 10Slow drifting camera, like a drone holding position.
Animate / TimeSee Animation controls. The scan only moves on its own while Auto Orbit is not 0 or Float is above 0.
Depth Fog0 to 10.2Fades the far parts of the scan into the background.
BackgroundColor, Dimmed Image, TransparentColorWhat shows through holes and around the scan.
Background ColorColorBlackShown when Background is Color.
Image Dim0 to 10.85Shown when Background is Dimmed Image. How much the picture behind the scan is darkened.

On-canvas handles: Camera (orbit for Turn, Tilt, Roll and Zoom) and Light (Light Angle, while Facets is above 0).

Fluted Glass

Views the picture through a sheet of ribbed glass. Each rib bends the image behind it, with optional color fringes and a highlight along the ribs. Use it for frosted-window, shower-glass and architectural glass looks.

Parameters

ControlRangeDefaultWhat it does
ShapeBars, Rounded, WavesBarsProfile of each glass rib. Waves makes the ribs sway.
EdgesStretch, Transparent, Mirror, WrapMirrorWhat shows where the glass looks past the picture's border.
Angle0 to 3600Direction of the ribs. 0 is vertical.
Frequency1 to 2010Number of ribs across the long side of the picture.
Softness0 to 10.5Low gives flat ribs with sharp seams, high gives a smooth curve.
Wave Amplitude0 to 0.50.06Shown when Shape is Waves. How far each rib sways sideways.
Wave Frequency0.1 to 101.5Shown when Shape is Waves. How many sways fit along each rib.
Refraction0 to 41.5How strongly each rib bends the picture behind it.
Aberration0 to 10.2Splits red and blue apart at the seams.
Speed-1 to 10Slides the ribs across the picture. Negative goes the other way.
Light Angle-90 to 9030Where the light hits the glass from. 0 is straight on.
Highlight0 to 20.01Brightness of the shine on each rib.
Highlight Softness0 to 10.7Low gives a thin bright line, high a wide soft sheen.
Animate / TimeSee Animation controls.
Highlight ColorColorWhiteColor of the shine.

On-canvas handle: Angle (rib direction).

Pixel Sort

Sorts runs of pixels along a direction by brightness, hue or a color channel, which melts the picture into long streaks. Use it for classic sorting artwork and streaked transitions.

Parameters

ControlRangeDefaultWhat it does
Sort AreasBrightness Range, Between Edges, Whole LinesBrightness RangeWhich parts of each line get sorted. Brightness Range sorts pixels between Low and High, Between Edges sorts the flat areas between outlines, Whole Lines sorts everything.
Low0 to 10.25Shown for Brightness Range. Pixels darker than this are left in place.
High0 to 10.8Shown for Brightness Range. Pixels brighter than this are left in place.
Edge Sensitivity0 to 10.5Shown for Between Edges. Higher finds more edges, which cuts the streaks shorter.
Invert AreasOn/OffOffShown for Brightness Range and Between Edges. Sorts the areas that would be left alone, and leaves the others.
Sort ByBrightness, Hue, Saturation, Red, Green, BlueBrightnessWhat the pixels are ordered by inside each streak.
Direction0 to 3600Direction the streaks run in.
ReverseOn/OffOffFlips the order inside each streak.
Max Length0 to 10800Longest streak in pixels at 1080p. 0 means no limit.
Randomness0 to 10Cuts streaks at random points, giving uneven lengths.
Coverage0 to 11Share of lines that get sorted. Lower leaves gaps between streaks.
Pixel Size1 to 161Sorts in blocks instead of single pixels.
Seed0 to 1000Picks a different random pattern for cuts and skipped lines.
AnimateOn/OffOffPicks a new random pattern over time.
Frame Rate1 to 308Shown while Animate is on. New patterns per second.
Mix0 to 11Blend between the original and the sorted image.

On-canvas handle: Direction.

Fluid

Bends the picture with liquid motion. One effect with three modes: glass blobs over the picture, flowing noise, or a field of small lenses.

Modes

ModeWhat it looks like
Liquid (default)Drifting glass blobs over the picture that merge and refract what is behind them.
FlowThe picture bends with flowing noise, like smoke or marble.
CellsThe picture splits into small lens cells.

Parameters

Shared by all modes:

ControlRangeDefaultWhat it does
ModeLiquid, Flow, CellsLiquidKind of distortion (see above).
Effect Mix0 to 11Blend between the plain image and the effect.
Speed0 to 20.5Animation speed.
Animate / TimeSee Animation controls.
Size0.2 to 41Scale of the blobs, waves or cells.
Dispersion0 to 10.3Splits colors where the picture is bent, like light through glass.

Liquid mode:

ControlRangeDefaultWhat it does
Blob Count1 to 167Number of drifting blobs.
Coverage0 to 10.5How much of the picture the liquid covers.
Merge0 to 10.5How early nearby blobs reach for each other and join.
Image Influence0 to 10.3Bright parts of the picture rise into glass of their own.
Refraction0 to 20.6How strongly the rim of the glass bends the picture behind it.
Depth0 to 10.5How thick the glass is: a wider curved rim and a deeper shadow.
Gloss0 to 10.6Rim light, highlights and edge reflections on the glass.
Background Dim0 to 10.35How dark the picture is outside the liquid.
Color Shift0 to 10Rotates colors inside the liquid, more where it is thicker.

Flow mode:

ControlRangeDefaultWhat it does
Amount0 to 20040How far the picture is pushed, in pixels at 1080p. Also shown in Cells mode.
Detail1 to 64Finer layers of noise on top of the large waves.
Turbulence0 to 10.5How much the noise folds into itself. Higher looks like marble or smoke.
Swirl0 to 10Turns the movement into small whirls.
Flow0 to 10Stretches the waves into streaks along the flow angle.
Flow Angle0 to 3600Direction of the streaks.

Cells mode:

ControlRangeDefaultWhat it does
Amount0 to 20040How far the picture is pushed, in pixels at 1080p.
Irregularity0 to 10.80 gives a regular grid, 1 fully random cells.
Edge Softness0 to 10.3Width of the soft border between cells.
Edge Light0 to 10.3Light and shade along the cell borders.

On-canvas handle: Flow (Flow Angle).

Lens Distortion

Splits the picture into color layers that spread apart like light through a strong lens, with bulge, swirl and grain. Use it for prismatic, dreamy and spectral looks. It does not animate on its own.

Parameters

ControlRangeDefaultWhat it does
Center X0 to 10.5Horizontal position of the lens center.
Center Y0 to 10.5Vertical position of the lens center.
Spread0 to 10.6How far apart the color layers are pushed. 0 turns the split off.
Angle0 to 3600Direction of the split, in degrees.
Perspective0 to 10.1Turns the split from one straight direction into a burst out from the center.
Bias-1 to 11Bunches the colors toward one end of the split. 0 spaces them evenly.
Dispersion0 to 11How strongly each layer takes its own rainbow color. 0 keeps the original color.
Shift-1 to 10Moves the rainbow colors toward the center (negative) or the edges (positive).
Hue0 to 10.6Turns the rainbow colors around the color wheel.
Focus Center0 to 10.8Keeps the middle of the picture sharp.
Focus Edges0 to 11Keeps the edges of the picture sharp.
Bulge-1 to 10Positive bulges the picture out, negative pinches it in.
Circle0 to 10Pulls the corners in so the picture becomes a circle.
Swirl-1 to 10.35Twists the color layers around the center.
Noise0 to 10Breaks the split direction up with noise.
Frequency0 to 10.25How fine the noise is.
Seed0 to 10Picks a different noise pattern.
Grain Mixer0 to 10Scatters the color layers with grain so their edges break up.
Grain Overlay0 to 10Adds black and white grain on top.

On-canvas handles: Center (point) and Angle.

Warp

Pushes the picture around with five kinds of geometric distortion. Pick a Mode and the panel shows only the controls for it.

Modes

ModeWhat it looks like
Ripple (default)Rings spread out from a point, like a drop in water.
WaveThe picture wobbles in horizontal and vertical bands, like an unstable signal.
SwirlThe picture twists into a whirlpool around a center.
BendThe picture curves like a curved screen.
SpinRings of the picture turn by different amounts.

Parameters

Shared controls:

ControlRangeDefaultWhat it does
ModeRipple, Wave, Swirl, Bend, SpinRippleKind of distortion (see above).
Speed0 to 41Shown for Ripple, Wave and Swirl. Animation speed.
Animate / TimeSee Animation controls.
Color Split0 to 10Pulls red and blue apart along the push.
EdgesClamp, Mirror, WrapClampShown for Ripple, Wave and Swirl. What shows where the picture is pushed past its border.
Mix0 to 11Blend between the original and the warped image.

Ripple mode:

ControlRangeDefaultWhat it does
Amount0 to 10016How far the picture is pushed, in pixels at 1080p.
Wavelength10 to 40080Distance between ripple crests, in pixels at 1080p.
Layers1 to 42Extra faster ripples stacked on the first.
Fade Out0 to 61.5How quickly ripples fade away from the center.
Sharpness0 to 10Turns smooth waves into sharper crests.
Turbulence0 to 10Breaks the rings up randomly.
Twist-1 to 10Adds sideways push so the rings also swirl.
Center X0 to 10.5Horizontal position of the center.
Center Y0 to 10.5Vertical position of the center.

Wave mode:

ControlRangeDefaultWhat it does
Horizontal0 to 8012How far bands slide sideways, in pixels at 1080p.
Vertical0 to 804How far bands move up and down, in pixels at 1080p.
Horizontal Waves1 to 12028Number of bands from top to bottom.
Vertical Waves1 to 12022Number of bands from left to right.
Coupling0 to 10.35Lets the horizontal wobble also move the vertical bands.

Swirl mode:

ControlRangeDefaultWhat it does
Twist Angle-720 to 720180How far the center is turned. Negative turns the other way.
Radius0.05 to 1.50.5Size of the whirlpool, as a share of the picture height.
Center X0 to 10.5Horizontal position of the center.
Center Y0 to 10.5Vertical position of the center.

Bend mode:

ControlRangeDefaultWhat it does
Strength-1 to 10.5How hard the ends bend. Positive curls them toward you, negative away.
Falloff0 to 10Keeps the middle flat and bends only near the ends.
Angle0 to 3600Direction of the bend. 0 bends the left and right ends, 90 the top and bottom.
EdgesStretch, Transparent, Mirror, WrapTransparentWhat shows where the bend pulls the picture away from the border.

Spin mode:

ControlRangeDefaultWhat it does
Intensity0 to 10020Largest turn of a ring, in degrees.
Rings1 to 308Number of rings.
Smoothness0 to 10.03Softness of the seams between rings.
Seed0 to 1000Picks a different set of ring turns.
Ring Speed-5 to 50.1How fast the rings keep turning. Negative turns the other way.
Speed Randomness0 to 10.5How much each ring's speed and direction differ.
Center X0 to 10.5Horizontal position of the center.
Center Y0 to 10.5Vertical position of the center.
EdgesStretch, Transparent, Mirror, WrapMirrorWhat shows where the rings turn the picture past its border.

On-canvas handles: Center (point), Bend (Bend angle) and Radius (Swirl radius).

Kaleidoscope

Mirrors the picture into symmetric wedges around a center, with optional twist, nested mirroring and color controls. Use it for mandala patterns and looping abstract visuals. It rotates on its own when Rotation Speed is not 0.

Parameters

ControlRangeDefaultWhat it does
Segments2 to 328Number of symmetry wedges.
Rotation-3.14 to 3.140Static rotation of the pattern (half a turn either way).
Rotation Speed-2 to 20Turns the pattern continuously. Negative turns the other way.
Zoom0.1 to 51Zooms into the center of the pattern.
Center X0 to 10.5Horizontal position of the mirror center.
Center Y0 to 10.5Vertical position of the mirror center.
Twist-5 to 50Spiral twist that grows with the distance from the center.
Radial Warp-2 to 20Stretches or squeezes the picture toward the outside before mirroring.
Recursion1 to 41Number of mirror bounces.
Pixel Size1 to 321Pixelates the picture inside the segments.
Chromatic0 to 0.10Splits red, green and blue on the mirrored segments.
Blend0 to 11Mix with the unmirrored picture.
Fractal Depth0 to 10Nests smaller mirrored copies inside each other.
Fractal Scale0.5 to 51.5How much each nested level shrinks.
Hue Shift-0.5 to 0.50Shifts the hue of the result.
Saturation0 to 31Color saturation after mirroring.
Brightness0 to 31Brightness after mirroring.
Contrast0 to 31Contrast after mirroring.
Vignette0 to 20Darkens the outer ring of the pattern.
MirrorOn/OffOnMirrors every second wedge so the seams meet cleanly. Off repeats the wedge without mirroring.

Fisheye

Simulates a real fisheye camera lens: the projection that squeezes a very wide view into a circle, plus the fringes, softness, vignette and haze of real fisheye glass. Use it for action-camera, skate-video, peephole and security-camera looks.

Styles

Choosing a style sets every lens control to match it. You can change anything afterward.

StyleWhat it looks like
Action Camera (default)A 150° view that fills the whole frame, with light fringes and vignette.
Skate VideoA 170° view in a large circle that is cut by the frame edges, with strong fringes and a dark vignette.
CircularA full 180° round picture that fits the frame height, with black around it.
Full FrameA 180° view that fills the frame corner to corner.
PeepholeA small, soft, hazy circle in a dark frame, like looking through a door viewer.
Security DomeA 180° round picture behind hazy domed glass.

Parameters

Defaults below are the values of the Action Camera style.

ControlRangeDefaultWhat it does
StyleAction Camera, Skate Video, Circular, Full Frame, Peephole, Security DomeAction CameraKind of fisheye camera (see above).
ProjectionEquidistant, Equisolid, Stereographic, OrthographicEquidistantHow the lens squeezes the view into the circle. Equidistant is common in action and security cameras, Equisolid in photo lenses, Stereographic keeps the edges larger, Orthographic squeezes the edges the most.
Field of View60 to 180150How wide the lens sees across its image circle. Wider bends straight lines more and brings the middle closer. The picture is stretched over the whole view.
Image Circle0 to 11Size of the round picture the lens throws. 0.5 fits the circle to the frame height, 1 fills the frame corner to corner, lower values leave a small circle in black. Animate it for a zoom fisheye.
Chromatic Aberration0 to 10.35Colored fringes toward the edge, because the lens bends red and blue light by different amounts.
Edge Softness0 to 10.25The picture gets softer toward the edge, as fisheye glass is sharpest in the middle.
Vignette0 to 10.3Light falling off toward the edge of the circle.
Haze0 to 10Scattered light from a cheap, dirty or domed front glass. Lifts the blacks and lowers contrast.
Zoom1 to 31Crops into the view.
Pan-30 to 300Turns the camera left or right. The picture is cropped as it turns so its edges never show.
Tilt-30 to 300Tilts the camera up or down, cropped the same way.
Roll-180 to 1800Rotates the camera around the view.

On-canvas handle: Camera (orbit for Pan, Tilt, Roll and Zoom).