Creative Effects
Screen, tape, console, print, line and texture looks in DASCA's Creative category, with every style and control explained.
These docs cover Dasca 2.3.
Creative effects turn your picture into a different medium: a TV tube, a worn tape, a game console, a print, a drawing or a light display. They are listed here in the same order as the Creative filter in the Effects library.
Every slider on this page can be keyframed (see Keyframes and Timeline). Controls marked as Transform appear in the Transform section of the effect settings, often with an on-canvas handle (see Transform and Gizmos). To combine effects, see Effect Chain.
How styles and Reset work
Several effects have a Style or Preset select at the top.
- On TV, VHS, Topo Contour, Thermal, Risograph and Prism Dispersion, choosing a style or preset sets many controls at once to match that look. You can then change any control.
- On Video Game, ASCII, Hatching, Film Grain and similar effects, the style picks the rendering method and decides which controls are shown.
- Reset to defaults (the reset button in the effect header) restores the defaults but keeps the style you have selected. On effects whose style sets other controls, Reset brings back that style's values.
Animate and Time
Some effects have an Animate switch (On/Off, default On). While it is off, a Time slider (0 to 120, default 0) appears. Time picks which moment of the animation is frozen on screen. This pair is noted in each effect's table where it exists.
TV
Simulates a picture tube: scan lines, phosphor masks, glow, curvature, signal artifacts and on-screen graphics. Use it for broadcast, arcade, terminal or surveillance monitor looks. Chain it after other effects so they appear "on the screen".
Styles
Each style sets every control below to match a kind of screen. The default is Security.
| Style | What it looks like |
|---|---|
| Living Room | A home color set fed by a composite cable. Slot mask, mild color bleed, a channel logo overlay. |
| Studio | A production monitor on a clean RGB feed. Aperture grille, crisp scan lines, a timecode overlay. |
| Arcade | A cabinet monitor on RGB. Large shadow mask dots, strong glow and misconvergence, a blinking arcade message. |
| Black & White | An older monochrome set on an antenna. Snow, ghosting, interlacing, strong vignette, a caption overlay. |
| Terminal | A green single-color monitor with long afterglow and a terminal text overlay. |
| Security | A monochrome surveillance monitor on composite. Noise, a drifting hum bar, interlacing and a camera overlay with a running clock. |
Parameters
Defaults below are the Security style values.
| Control | Range | Default | What it does |
|---|---|---|---|
| Style | Living Room, Studio, Arcade, Black & White, Terminal, Security | Security | Type of screen. Sets every control to match. |
| Signal | RGB, S-Video, Composite, Antenna | Composite | How the picture reaches the screen. RGB is cleanest, S-Video softens color, Composite adds color bleeding, crawling dots and rainbow edges, Antenna adds reception noise. |
| Color System | NTSC, PAL | NTSC | Broadcast standard. Shown for Composite and Antenna. PAL hides hue errors but blurs color between lines. |
| Snow | 0 to 1 | 0 | Weak reception: static, drained color, unsteady lines. Antenna only. |
| Ghosting | 0 to 1 | 0 | A faint copy of the picture to the right, from signal reflections. Antenna only. |
| Noise | 0 to 1 | 0.3 | Fine grain from the camera or cable, on any signal. |
| Hum Bar | 0 to 1 | 0.35 | A dark band that slowly drifts up the picture. |
| Line Size | 1.5 to 12 | 2.25 | Height of one scan line on a 1080p image. 4.5 matches a classic console picture, 2.25 a broadcast picture. |
| Interlaced | On/Off | On | Draws odd and even lines in turns. Fine detail flickers and motion shows comb edges. |
| Scanlines | 0 to 1 | 0.3 | How thin the beam is in dark areas. Bright areas always widen and fill the gaps. |
| Sharpness | 0 to 1 | 0.6 | The set's sharpness control. Low is soft, high adds bright outlines next to edges. |
| Phosphor | Color, White, Green, Amber | White | Screen coating. Color uses a red, green and blue mask. White, Green and Amber are single-color tubes. |
| Mask | Aperture Grille, Slot Mask, Shadow Mask | Slot Mask | Pattern of the colored phosphors: thin stripes, short slots or round dots. Color phosphor only. |
| Mask Size | 1.5 to 10 | 3 | Width of one red, green and blue group on a 1080p image. Masks too small for the output fade out instead of causing moire. Color phosphor only. |
| Mask Strength | 0 to 1 | 0.6 | How visible the phosphor pattern is. Color phosphor only. |
| Misconvergence | 0 to 1 | 0 | Red and blue beams drift apart from green, more toward the edges. Color phosphor only. |
| Glow | 0 to 1 | 0.2 | Light scattered inside the glass. Bright areas spread a soft halo. |
| Afterglow | 0 to 1 | 0.15 | Phosphors keep glowing after the beam passes, leaving trails behind moving bright things. |
| Curvature | 0 to 1 | 0 | Bulge of the glass. Aperture grille tubes curve only sideways. |
| Corners | 0 to 1 | 0 | Roundness of the screen corners. |
| Vignette | 0 to 1 | 0.4 | Darker edges and corners. |
| Overlay | Off, Channel Logo, TV Menu, No Signal, Subtitles, SMS Ticker, Timecode, Arcade, Terminal, Camera, Caption | Camera | Text and graphics carried inside the picture signal, so they get the same bleed, noise and curve as the image. Each overlay keeps its own text. |
| Vertical Roll | 0 to 1 | 0 | The picture keeps rolling up, like a set that lost its vertical hold. |
| Channel Change | 0 to 1 | 0 | Switching channels: the picture breaks into static, rolls once and locks back in. Keyframe it from 0 to 1 to play it. |
| Switch Off | 0 to 1 | 0 | Turning the set off: the picture collapses into a bright line, then a dot that fades. Keyframe it to animate. |
| Animate / Time | On/Off, 0 to 120 | On, 0 | See Animate and Time. |
Overlay controls
These appear below Overlay depending on the overlay you pick.
| Control | Shown for | Default | What it does |
|---|---|---|---|
| Text | Every overlay except Off | Depends on overlay | The overlay's own text. Channel Logo: channel name ("TV 3"). TV Menu: word before the number ("CH", leave empty for the number only). No Signal: blue screen message. Subtitles: subtitle lines, one per line. SMS Ticker: viewer messages, one per line. Timecode: label before the timecode. Arcade: blinking message. Terminal: terminal lines, followed by a blinking cursor. Camera: camera name. Caption: caption at the bottom. |
| Channel Number | TV Menu | 12 (1 to 99) | Channel shown by the menu. Use hold keyframes to switch it, for example at the peak of a Channel Change. |
| Subtitle Line | Subtitles | 0 (0 to 30) | 0 plays the lines by themselves. A number holds that line until it changes, so hold keyframes can time each line. With PAL subtitles show two lines at a time, with NTSC they roll up letter by letter. |
| Volume | TV Menu | 0.6 (0 to 1) | Level of the volume bar. |
| Volume Opacity | TV Menu | 1 (0 to 1) | Visibility of the volume bar. Keyframe it to pop it up and fade it away. |
| Scroll Speed | SMS Ticker | 0.4 (0 to 1) | How fast the messages scroll. |
| Logo | Channel Logo | None | An image used as the channel logo, shown half see-through in the corner. Use Load or Replace to pick an image, the X button to remove it. |
| Start Time | Camera | 02:14:07 | Time the camera clock shows at the start, as hours:minutes:seconds. It then runs with the picture, so preview and export match. |
| Font | Channel Logo, Caption, SMS Ticker | A system sans-serif font | Font of the channel name, caption or messages. Other overlays use a dot font like real character generators. |
| Position | Channel Logo | Top Right | Corner of the logo: Top Left, Top Right, Bottom Left, Bottom Right. |
| Overlay Size | Every overlay except Off | 1 (0.5 to 3) | Size of the overlay. |
| Overlay Opacity | Every overlay except Off | 1 (0 to 1) | Visibility of the whole overlay. Hold keyframes pop it on and off, smooth keyframes fade it. |
TV animates only when something moves: noise, hum, snow on Antenna, interlacing, rolling, a live overlay (Subtitles, SMS Ticker, Timecode, Arcade, Terminal, Camera) or a Channel Change in progress.
Scanscape
Turns the picture into a 3D landscape of glowing lines. Brightness lifts each line like terrain, and you can tilt and turn the surface in space. Use it for audio-visual and data-style visuals.
Parameters
| Control | Range | Default | What it does |
|---|---|---|---|
| Direction | Horizontal, Vertical, Grid | Horizontal | Which way the lines run. Grid draws both. |
| Lines | 20 to 400 | 110 | How many lines run across the picture. |
| Height | 0 to 3 | 0.8 | How far the picture lifts the lines. |
| Raise | Bright Areas, Dark Areas | Bright Areas | Which parts of the picture lift the lines. |
| Smoothing | 0 to 1 | 0.25 | Softens the picture before it shapes the lines. Low keeps fine detail, high gives rolling hills. |
| Thickness | 0.3 to 6 | 1.2 | Line thickness in pixels at 1080p. |
| Glow | 0 to 1 | 0 | Soft light around the lines. |
| Shading | 0 to 1 | 0.3 | Dims the lines where the picture is dark. |
| Solid | On/Off | On | Lines in front hide the lines behind them. |
| Blend | Light (Add), Normal | Light (Add) | Light adds overlapping lines so they glow. Normal paints them on top. |
| Ripple | 0 to 1 | 0 | Rolls a wave through the lines. |
| Jitter | 0 to 1 | 0 | Shakes random lines sideways, like an unstable signal. |
| Scroll | -1 to 1 | 0 | Moves the lines across the picture. 0 keeps them still. |
| Animate / Time | On/Off, 0 to 120 | On, 0 | See Animate and Time. Motion only happens when Scroll, Ripple or Jitter is set. |
| Color | Picture, Single, Height Gradient | Picture | Picture takes colors from the image. Single uses one ink. Height Gradient colors by how high the line rises. |
| Ink | Color | White | Line color. Shown for Single. |
| Low / High | Color | Blue / White | Colors of the lowest and highest parts of the lines. Shown for Height Gradient. |
| Background | Color | Black | Color behind the lines. |
| Backdrop | 0 to 1 | 0 | Shows the picture behind the lines. |
| Mix | 0 to 1 | 1 | Blend between the original and the effect. |
| Tilt (Transform) | -80 to 80 | 0 | Tips the surface forward or back. |
| Turn (Transform) | -80 to 80 | 0 | Turns the surface to the side. |
| Zoom (Transform) | 0.5 to 2.5 | 1 | Moves the camera closer. |
Tilt, Turn and Zoom also have an Orbit handle on the canvas.
Ghost Trail
Leaves fading copies of moving things behind them. Use it on video, animation or 3D scenes for motion trails, light painting and echo tunnels. On a still image nothing changes between frames, so Motion trails stay empty.
Parameters
| Control | Range | Default | What it does |
|---|---|---|---|
| Source | Motion, Transparency | Motion | Motion trails whatever changes between frames. Transparency trails the shape of see-through content. |
| Sensitivity | 0.01 to 0.5 | 0.45 | How small a change still leaves a trail. Motion only. |
| Length | 0.05 to 4 | 0.6 | How long the trail stays, in seconds. |
| Smear | 0 to 1 | 1 | How much the trail softens as it fades. 0 leaves crisp copies. |
| Opacity | 0 to 1 | 1 | Strength of the trail. |
| Blend | Normal, Add, Screen, Multiply, Overlay, Soft Light, Hard Light, Darken, Lighten, Color Dodge, Color Burn, Linear Burn, Difference, Exclusion, Hue, Saturation, Color, Luminosity | Normal | How the trail mixes with the picture. Add and Screen build glowing light trails. |
| Tunnel | 0.9 to 1.1 | 1 | Above 1 the trail zooms outward like a tunnel, below 1 it pulls inward. |
| Color | Original, Tint, Rainbow | Original | Keep the trail's own colors, tint it one color, or cycle through the rainbow as it ages. |
| Tint | Color | Light blue | Color of the trail. Shown when Color is Tint. |
| Speed | 0 to 4 | 1 | How fast the trail evolves. 0 freezes it. |
| Animate / Time | On/Off, 0 to 120 | On, 0 | See Animate and Time. |
| Drift X (Transform) | -1 to 1 | 0 | Pushes the trail sideways over time. |
| Drift Y (Transform) | -1 to 1 | 0 | Pushes the trail up or down over time. |
Drift X and Drift Y share a Drift arrow handle on the canvas.
VHS
Simulates playback of a video tape: soft luminance, smeared and late color, noise, wobble, the head switching band, tracking errors and dropouts. Use it for home video, rental tape and found footage looks.
Styles
Each style sets every control below to match a kind of tape. The default is Rental Tape.
| Style | What it looks like |
|---|---|
| Rental Tape | A second generation copy at standard speed. Moderate noise and bleed, a few dropouts. |
| Home Movie | A first generation camera tape, slightly sharper, with a burned-in date stamp. |
| TV Recording | A broadcast recorded at the slowest speed. Noisier, more color noise and jitter. |
| Bootleg Copy | A fourth generation copy. Soft, faded, heavy bleed and over-sharpened edges. |
| Found Footage | A damaged tape with tracking trouble, many dropouts and a date stamp. |
| Paused | A tape on pause, frozen on one field with the deck's display shown. |
Parameters
Defaults below are the Rental Tape style values.
| Control | Range | Default | What it does |
|---|---|---|---|
| Style | Rental Tape, Home Movie, TV Recording, Bootleg Copy, Found Footage, Paused | Rental Tape | Kind of tape. Sets every control to match. |
| Color System | NTSC, PAL | NTSC | NTSC has 480 lines and more color noise, PAL has 576 lines and steadier color. |
| Tape Speed | SP, LP, EP | SP | SP gives the best picture. LP and EP fit more hours on a tape but get softer, noisier and less stable. |
| Generation | 1 to 5 | 2 | How many times the tape was copied. Each copy softens the picture, fades color, lifts blacks and adds noise. Animate it to watch a picture wear out. |
| Sharpness | 0 to 1 | 0.5 | The deck's picture control. High adds the bright outlines next to edges that tapes are known for. |
| Noise | 0 to 1 | 0.3 | Grainy horizontal streaks from the tape and heads. |
| Color Noise | 0 to 1 | 0.35 | Smeared colored streaks, strongest in saturated and dark areas. |
| Color Bleed | 0 to 1 | 0.35 | Color runs to the right of shapes because it lags behind the picture. |
| Jitter | 0 to 1 | 0.3 | Lines wobble sideways and the top of the picture bends. |
| Head Switching | 0 to 1 | 0.45 | The torn band at the bottom of the picture where the playback heads take turns. |
| Tracking Error | 0 to 1 | 0 | How far the heads drift off the recorded tracks. A noise band grows, the picture shakes and jumps. Animate it from high to 0 to show someone fixing the tracking. |
| Dropouts | 0 to 1 | 0.15 | Short white flashes where bits of tape coating are missing. |
| Playback | Play, Pause, Fast Forward, Rewind, Stop | Play | What the deck is doing. Pause freezes a playing video on one field with a noise bar, Fast Forward and Rewind show search bars, Stop shows the blue screen. Use hold keyframes to switch. |
| Overlay | Off, VCR Display, Date Stamp | Off | VCR Display is drawn by the deck over the picture and stays clean. Date Stamp was burned in by the camera, so it wears with the tape. |
| Date | Text | JUL 4 1996 | Date shown by the camera. Date Stamp only. |
| Start Time | Text | 19:24:17 | Camera clock at the start, as hours:minutes:seconds. It runs with the picture. Date Stamp only. |
| Position | Top Left, Top Right, Bottom Left, Bottom Right | Bottom Right | Corner of the date stamp. Date Stamp only. |
| Overlay Size | 0.5 to 3 | 1 | Size of the overlay. Shown when an overlay is on. |
| Overlay Opacity | 0 to 1 | 1 | Visibility of the overlay. Hold keyframes pop it on and off, smooth keyframes fade it. Shown when an overlay is on. |
| Animate / Time | On/Off, 0 to 120 | On, 0 | See Animate and Time. |
Video Game
Renders the picture the way classic game hardware would: at the console's own resolution, with its color limits, dithering and quirks, and through the cable it used. Polygon styles rebuild the picture as a textured 3D surface with a moving game camera. For the screen itself, chain a TV effect after this one.
Styles
The style picks the hardware. It does not change other control values, but it decides which controls are shown. The default is Play Disc.
| Style | What it emulates |
|---|---|
| Family | The first widely popular cartridge home console. Low resolution, a small fixed color set, few colors per screen area, dithering. |
| Super Family | Its successor cartridge console. Wider color range and more colors per area, no dithering. The subtlest style. |
| Mega | A rival console of the same era. Wider screen mode, a coarse color ladder and column dithering. |
| Play Disc | The first disc-based 3D console. Wobbling textured polygons, shaking vertices, limited texture colors and its dither pattern. Also has a compressed movie mode. |
| Sixty-Four | A cartridge 3D console. Tiny blurred textures, distance fog, smooth output smear and its own dither patterns. |
| Play Disc 2 | The following disc console. Higher resolution, interlacing, a flicker filter, bloom and optional 16-bit color. |
| The original monochrome handheld. Four shades on a green, grey or backlit screen, pixel grid and ghosting. | |
| Pocket Color | The color version of that handheld. Few colors per tile, muted screen colors, pixel grid. |
| Pocket Advance | The later widescreen handheld. More colors, tile or bitmap video modes, muted screen colors. |
General controls
| Control | Range | Default | What it does |
|---|---|---|---|
| Style | See above | Play Disc | Which console the picture is rendered like. |
| Resolution | Half, Native, Double | Native | Native uses the console's own resolution. Half gives bigger pixels, Double gives finer ones. |
| Dither | 0 to 1 | 1 | Pattern the console uses to fake colors it cannot show. Shown for Family, Mega, Sixty-Four, Pocket, Pocket Color, Play Disc in Polygons mode, and Play Disc 2 in Polygons mode with 16-bit color. |
| Signal | Clean, S-Video, Composite, Antenna | Composite | Cable between the console and the TV. Composite and Antenna add color bleeding and rainbow edges. Home console styles only. |
| Frame Rate | Full, 30 fps, 20 fps, 15 fps | Full | Holds frames to run at the console's slower speed. Mostly visible on video. |
| Animate / Time | On/Off, 0 to 120 | On, 0 | See Animate and Time. Shown after Frame Rate. |
Disc console controls (Play Disc, Play Disc 2)
| Control | Range | Default | What it does |
|---|---|---|---|
| Mode | Polygons, Movie | Polygons | Polygons builds the picture from textured 3D polygons. Movie looks like the console's compressed video cutscenes. |
| Compression | 0 to 1 | 0.45 | How hard the movie is compressed. Higher shows more blocks and smeared color. Movie mode only. |
| Polygon Size | 0 to 1 | 0.55 | Size of the polygons. Bigger polygons bend the texture more. Play Disc Polygons only. |
| Vertex Jitter | 0 to 1 | 0.3 | Snaps polygon corners to whole pixels, so edges shake as they move. Play Disc Polygons only. |
| Texel Size | 1 to 4 | 2 | Size of one texture pixel. Play Disc Polygons only. |
| Texture Colors | Full, 256 Colors, 16 Colors | 256 Colors | Colors stored per texture. Lower gives banded, posterized surfaces. Play Disc Polygons only. |
| Shading | 0 to 1 | 0.5 | Lighting baked into polygon corners and blended across each polygon. Play Disc Polygons only. |
| Depth Cue | 0 to 1 | 0 | Fades far polygons into the cue color, like built-in depth fog. Play Disc Polygons only. |
| Cue Color | Color | Black | Color far polygons fade into. Shown when Depth Cue is above 0. |
| Render Mode | Frame, Field | Frame | Field draws every other line and doubles it, giving stair-stepped edges and comb lines on motion. Play Disc 2 Polygons only. |
| Flicker Filter | On/Off | On | Softens the picture vertically so thin lines do not flicker. Play Disc 2, in Movie mode or Frame render mode. |
| Width | 640, 512 | 640 | 512 is stretched to the screen and slightly softer. Play Disc 2 only. |
| Color Depth | 32-bit, 16-bit | 32-bit | 16-bit adds the console's dither pattern. Play Disc 2 Polygons only. |
| Mipmaps | On/Off | Off | Smaller texture copies for distant surfaces. Off makes distant textures sparkle when the camera moves. Play Disc 2 Polygons only. |
| Bloom | 0 to 1 | 0.45 | Glow around bright areas. Play Disc 2 only. |
| Interlace | 0 to 1 | 0.5 | Draws every other line from the previous frame, so moving video gets comb-like edges. Play Disc 2 only. |
Sixty-Four controls
| Control | Range | Default | What it does |
|---|---|---|---|
| Texel Size | 1 to 8 | 3.5 | Size of one texture pixel. Small textures stretched and blurred over large surfaces. |
| Texture Format | 16-bit, 256 Colors, 16 Colors, Intensity | 16-bit | How textures were stored. Intensity keeps only brightness detail and takes color from the polygon corners. |
| Fog | 0 to 1 | 0.35 | Distance fog. With a still camera it is an even haze. |
| Fog Reach | 0 to 1 | 0.75 | How close the fog comes to the camera. Shown when Fog is above 0. |
| Fog Color | Color | Grey blue | Color of the fog. Shown when Fog is above 0. |
| Smear | 0 to 1 | 0.6 | Soft output that stretched the picture to the TV and smoothed pixels together. |
| Dither Pattern | Magic Square, Bayer, Noise | Magic Square | Pattern used to fake colors. Noise changes every frame. |
| Dedither | On/Off | On | The video output smoothing out the dither, leaving a faint trace on flat areas. |
3D camera (Play Disc and Play Disc 2 in Polygons mode, Sixty-Four)
| Control | Range | Default | What it does |
|---|---|---|---|
| Camera | Still, Sway, Orbit, Shake, Cutscene, First Person | Still | How the game camera moves. Cutscene glides between shots and cuts every few seconds. First Person walks with a head bob and looks around. |
| Camera Amount | 0 to 1 | 0.5 | How far the camera moves. Shown when the camera moves. |
| Camera Speed | 0 to 3 | 1 | How fast the camera moves. Shown when the camera moves. |
Mega and handheld controls
| Control | Range | Default | What it does |
|---|---|---|---|
| Width | 320, 256 | 320 | Screen mode. 256 has fewer, wider pixels. Mega only. |
| Video Mode | Tiles 16 Colors, Tiles 256 Colors, Bitmap | Tiles 16 Colors | How the picture is stored. Tiles 16 Colors gives each 8x8 block one of 16 small palettes, Tiles 256 Colors uses one shared palette, Bitmap shows every color. Pocket Advance only. |
| Screen | Green, Grey, Backlit | Green | Color of the screen. Pocket only. |
| Contrast | 0 to 1 | 0.5 | Contrast of the camera picture before it becomes four shades. Pocket only. |
| Edge Enhance | 0 to 1 | 0.4 | Built-in edge sharpening of the handheld camera sensor. Pocket only. |
| Screen Color | 0 to 1 | 0.7 | Colors as shown on the handheld screen, muted and shifted. Pocket Color and Pocket Advance. |
| Pixel Grid | 0 to 1 | 0.5 | Visible gaps between screen pixels. All handhelds. |
| Ghosting | 0 to 1 | 0.35 | Slow screen response that leaves faint trails behind moving things. All handhelds. |
ASCII
Rebuilds the picture from text characters or drawn symbols, picked by brightness. Use it for terminal art, typographic portraits and text textures.
Styles
| Style | What it looks like |
|---|---|
| Classic (default) | Characters on a plain background. |
| Blend | Characters drawn over the picture. |
| Sentence | Your own text repeated across the picture in reading order. |
| Symbols | Drawn shapes instead of a font. |
Parameters
| Control | Range | Default | What it does |
|---|---|---|---|
| Style | Classic, Blend, Sentence, Symbols | Classic | See above. |
| Characters | Text | .:-=+*#%@ | Characters from sparse to dense. The first one is used for the darkest areas. Classic and Blend. |
| Text | Text | DASCA | Text written across the picture. Sentence only. |
| Font | System fonts | A monospaced system font | Font used for the characters. Classic, Blend and Sentence. |
| Character Size | 4 to 64 | 12 | Character height in pixels at 1080p. |
| Letter Spacing | 0.6 to 2 | 1 | Space between characters on a line. |
| Brightness | -0.5 to 0.5 | 0 | Brightness used to pick characters. |
| Contrast | 0.5 to 2 | 1 | Contrast used to pick characters. |
| Gamma | 0.4 to 2.5 | 1 | Midtone curve used to pick characters. Above 1 lightens. |
| Edge Detail | 0 to 2 | 0 | Uses denser characters along outlines so shapes read better. |
| Invert | On/Off | Off | Dense characters for dark areas instead of bright ones. |
| Hide Below | 0 to 1 | 0.1 | Areas darker than this stay empty. Sentence only. |
| Picture | 0 to 1 | 0.35 | How much of the picture shows behind the characters. Blend only. |
| Picture Blur | 0 to 40 | 0 | Softens the picture behind the characters. Blend only. |
| Glow | 0 to 1 | 0 | Soft light around each character. |
| Color | Picture, Single | Picture | Picture colors each character with the color under it. Single uses one ink color. |
| Ink | Color | White | Character color. Single only. |
| Transparent Background | On/Off | Off | Keeps only the characters, everything else becomes transparent. |
| Background | Color | Black | Color behind the characters. Shown for Classic, Sentence and Symbols when Transparent Background is off. |
Signal
Draws the picture as a modulated carrier: brightness bends a field of fine lines. In Decoded mode it turns the carrier back into a picture with the flaws of a cheap receiver. Use it for neon scan-line portraits and oscilloscope-style graphics.
Parameters
| Control | Range | Default | What it does |
|---|---|---|---|
| Mode | Carrier, Decoded | Carrier | Carrier draws the modulated lines. Decoded rebuilds a picture from them, with ringing and banding. |
| Direction | Horizontal, Vertical | Horizontal | Direction the signal runs along. |
| Frequency | 10 to 400 | 120 | Carrier lines across 1080 pixels when the picture is mid-grey. |
| Modulation | 0 to 0.95 | 0.6 | How much brightness bends the carrier. Higher squeezes lines harder in bright areas. |
| Line Width | 0.02 to 0.9 | 0.25 | Thickness of the carrier lines. Carrier only. |
| Shade | 0 to 1 | 0.5 | Dark parts switch the beam off, so lines break into dots at the edges and vanish in shadows. 0 draws every line. Carrier only. |
| Levels | 2 to 32 | 4 | Steps the carrier is cut into before decoding. Fewer steps give stronger ringing. Decoded only. |
| Smoothing | 1 to 64 | 8 | Length of the receiver's averaging window in pixels at 1080p. Decoded only. |
| Noise | 0 to 1 | 0 | Random jitter in the signal. |
| Drift | -2 to 2 | 0 | Moves the carrier along the lines. 0 keeps it still. The effect animates only when Drift is not 0. |
| Invert | On/Off | Off | Swaps ink and background. |
| Color | Picture, Single | Single | Picture colors the result with the image. Single uses one ink color. |
| Ink | Color | Purple | Color of the lines and their glow. Single only. |
| Hot Core | 0 to 1 | 0.5 | Overdrives the middle of each line until it burns toward white. Carrier only. |
| Glow | 0 to 3 | 1.5 | Light spreading from the lines. Brighter and denser lines glow more. |
| Glow Size | 2 to 120 | 16 | How far the glow reaches, in pixels at 1080p. Hidden when Glow is 0. |
| Background | Color | Black | Color where there is no ink. |
| Mix | 0 to 1 | 1 | Blend between the original and the signal. |
Film Stock
Grades the picture with a color lookup table from a .cube file and adds a gentle projector weave. Use it to apply a film emulation or any color grade you already have as a LUT.
Parameters
| Control | Range | Default | What it does |
|---|---|---|---|
| LUT | .cube file | None | Color grade from a .cube file. Click Load to pick one. The file name is shown, with a button to remove it. Without a LUT only the other controls apply. |
| Strength | 0 to 1 | 1 | How much of the LUT grade is applied. |
| Exposure | -2 to 2 | 0 | Brightens or darkens the picture before the LUT, in stops. Use it to match what the LUT expects. |
| Saturation | 0 to 2 | 1 | Color intensity after the grade. 0 is black and white. |
| Keep Brightness | On/Off | Off | Takes only the colors from the LUT and keeps the original brightness. |
| Gate Weave | 0 to 1 | 0 | Small drifting shake, like film moving through a projector. |
| Animate / Time | On/Off, 0 to 120 | On, 0 | See Animate and Time. |
Window Smear
Recreates the old desktop bug where a dragged window leaves stuck copies of itself across the screen, with snakes of sprites crawling on top. Use it for retro computer and turn-of-the-millennium desktop looks. The effect covers the whole canvas, including areas outside a letterboxed picture.
Parameters
| Control | Range | Default | What it does |
|---|---|---|---|
| Window | Picture, Error Dialog | Picture | What each window shows: your picture, or an error message. |
| Style | Classic, Glossy | Classic | Look of the window frame: a grey bevelled frame or a glossy rounded blue frame. |
| Title | Text | untitled.bmp | Text in the title bar. |
| Message | Text | An error message | Text inside the error dialog. Error Dialog only. |
| Window Size | 120 to 900 | 420 | Size of the window in pixels at 1080p. |
| Path | Drag, Bounce, Figure Eight, Spiral | Drag | How the window is dragged around. |
| Windows | 1 to 6 | 2 | How many separate windows are dragged at the same time. |
| Copies | 1 to 64 | 32 | How many leftover copies each window leaves behind. |
| Spacing | 4 to 160 | 28 | Distance between the leftover copies. |
| Tail End | Dissolve, Wipe, Cut | Dissolve | How the oldest copy goes away when a new one appears. |
| Cursor | On/Off | On | Shows the mouse pointer on the window being dragged. |
| Sprite | None, Smiley, Orb, Custom, Eyeball, Star, Heart | Smiley | What the snakes are made of. |
| Image | Image slot | None | Image for the snake pieces when Sprite is Custom. When empty, your picture is used. |
| Snakes | 1 to 4 | 2 | How many snakes crawl over the windows. Hidden when Sprite is None. |
| Length | 1 to 48 | 22 | How many pieces each snake has. Hidden when Sprite is None. |
| Sprite Size | 24 to 320 | 96 | Size of each snake piece in pixels at 1080p. Hidden when Sprite is None. |
| Background | Color, Custom | Color | What is behind the windows: a desktop color or your own image. Your main picture is never used as the background. |
| Image | Image slot | None | Image behind the windows when Background is Custom. When empty, the desktop color is used. |
| Layout | Fill, Fit, Stretch, Tile | Fill | How the background image covers the canvas. Fill crops, Fit shows all of it with the desktop color around, Stretch distorts it, Tile repeats it. Custom background only. |
| Desktop Color | Color | Teal | Color behind the windows. Shown for Color backgrounds, and for Custom with Fit. |
| Tile Size | 40 to 600 | 180 | Height of each tile in pixels at 1080p. Custom background with Tile only. |
| Pixel Size | 1 to 6 | 2 | Size of one screen pixel. Higher looks like an old low resolution screen. |
| Speed | 0 to 2 | 0.6 | How fast everything moves. 0 freezes it. |
| Stutter | 0 to 1 | 0.55 | Drops frames so the motion jumps like a slow old computer. |
| Animate / Time | On/Off, 0 to 120 | On, 0 | See Animate and Time. |
| Layout | Shuffle button | Picks new paths for the windows and snakes. |
Image slots
The two Image slots load a still image from disk. Click Load to pick an image, Replace to change it, and the X button to remove it. A small preview and the file name are shown. The image is stored with your project. If the image cannot be found when a project opens, the slot shows Missing in red. See Project Files.
Hatching
Draws the picture with ink lines whose weight follows the tones. Use it for engraving, etching, pen-and-ink and banknote-style illustration.
Styles
| Style | What it looks like |
|---|---|
| Engraving (default) | Wavy copper-plate lines that bend over the shapes. |
| Lines | Straight strokes that grow thicker in dark areas, with up to four crossing layers. |
Parameters
| Control | Range | Default | What it does |
|---|---|---|---|
| Style | Engraving, Lines | Engraving | See above. |
| Engraving | Line, Cross-Hatch, Spiral | Cross-Hatch | Line is one set of lines, Cross-Hatch adds crossing lines in shadows, Spiral coils one line out from a point. Engraving only. |
| Layers | 1 · Single, 2 · Cross, 3 · Triple, 4 · Quad | 1 · Single | How many sets of crossing lines are drawn. Lines only. |
| Line Spacing | 2 to 128 | 12 | Distance between lines in pixels. Lines only. |
| Lines | 20 to 300 | 90 | How many lines fit across the picture height. Engraving only. |
| Min Width | 0 to 0.5 | 0.02 | Line thickness in the lightest areas. Lines only. |
| Max Width | 0.1 to 0.99 | 0.82 | Line thickness in the darkest areas. Lines only. |
| Softness | 0.1 to 4 | 0.8 | Softness of the line edges. Lines only. |
| Relief | 0 to 2 | 0.6 | How far brightness pushes the lines sideways, so they bend over the shapes. Engraving only. |
| Waviness | 0 to 1 | 0.35 | How much the lines meander, like a hand-cut stroke. Engraving only. |
| Gamma | 0.2 to 4 | 1 | Tone curve. Lower puts more ink in the shadows, higher pulls it back. |
| Edge Boost | 0 to 2 | 0 | Adds ink along edges for a hand-drawn look. |
| Invert | On/Off | Off | Light areas get the heavy ink instead of dark ones. |
| Snap to Stripe | On/Off | Off | Reads the tone once per line so each stroke has an even weight. Lines only. |
| Layer 2 Offset / Layer 3 Offset / Layer 4 Offset | 1 to 179 | 45 / 90 / 135 | Angle of each extra set of lines relative to the first. Shown when Layers includes that set. |
| Layer 2 Strength / Layer 3 Strength / Layer 4 Strength | 0 to 1 | 0.7 / 0.55 / 0.4 | How strongly each extra set shows. |
| BG Opacity | 0 to 1 | 1 | Opacity of the gaps. 0 keeps them transparent. |
| Use Source Colors | On/Off | Off | Draws the lines in the picture's own colors. |
| Color Blend | 0 to 1 | 0 | Mixes the picture's colors into the line color. |
| Line Color | Color | Black | Color of the lines. |
| Background | Color | Warm tan | Color between the lines. |
| Angle (Transform) | 0 to 360 | 0 | Direction of the lines in degrees. Lines style, and Engraving with Line or Cross-Hatch. |
| Center X / Center Y (Transform) | 0 to 1 | 0.5 | Point the spiral starts from. Engraving with Spiral only. |
Angle and Center have on-canvas handles.
LCD Subpixel
Shows the picture as a close-up of a flat panel: every pixel split into red, green and blue subpixels with gaps between them. Use it for macro screen shots and display-wall looks.
Parameters
| Control | Range | Default | What it does |
|---|---|---|---|
| Layout | RGB Stripe, BGR Stripe, Vertical Stripe, PenTile (OLED), Delta Triad, LED Matrix | RGB Stripe | Subpixel arrangement of the panel. LED Matrix lights one dot per pixel, like an LED sign. |
| Pixel Size | 4 to 120 | 24 | Size of one pixel cell relative to a 1080p image. Larger is coarser. |
| Strength | 0 to 1 | 1 | Blend between the plain image and the subpixel grid. |
| Pixel Gap | 0 to 0.6 | 0.12 | Black matrix between pixel cells. |
| Subpixel Gap | 0 to 0.6 | 0.12 | Gap between subpixels inside a cell. |
| Roundness | 0 to 1 | 0.3 | Corner rounding of each subpixel. |
| Softness | 0 to 1 | 0.35 | Edge softness of each subpixel. |
| Light Bleed | 0 to 1 | 0 | Light spilling out of lit subpixels. Bright areas wash the grid out. |
| Brightness | 0.5 to 2 | 1 | Overall brightness. 1 keeps the source's average brightness. |
Film Grain
Adds animated film grain, or a light leak bleeding in from the edge of the frame.
Styles
| Style | What it looks like |
|---|---|
| Grain (default) | Film noise that responds to shadows and highlights. |
| Light Leak | A warm glow with streaks bleeding into the frame from one point. |
Parameters
| Control | Range | Default | What it does |
|---|---|---|---|
| Style | Grain, Light Leak | Grain | See above. |
| Animate / Time | On/Off, 0 to 120 | On, 0 | See Animate and Time. Shown right after Style. |
| Amount | 0 to 0.35 | 0.08 | How strong the grain is. Grain only. |
| Grain Size | 50 to 500 | 180 | Size of the grain. Higher gives coarser grain. Grain only. |
| Mix | 0 to 1 | 1 | Blend between the clean and the grained picture. Grain only. |
| Shadows | 0.5 to 2.5 | 1.15 | Extra grain in the dark parts. Grain only. |
| Highlights | 0 to 1 | 0.7 | How much grain stays in bright parts. Lower keeps highlights cleaner. Grain only. |
| Softness | 0 to 1 | 0.4 | Softens each grain. Grain only. |
| Color | 0 to 1 | 0.2 | Moves from mono grain toward separate grain per color channel. Grain only. |
| Speed | 0 to 3 | 1 | How fast the grain changes from frame to frame. Grain only. |
| Spread | 0.1 to 1.5 | 0.55 | How far the light reaches into the picture. Light Leak only. |
| Intensity | 0 to 1 | 0.15 | Brightness of the leak. Light Leak only. |
| Streaks | 0 to 1 | 0.6 | Strength of the bright bands along the leak. Light Leak only. |
| Hot Core | Color | Pale yellow | Color at the brightest, burnt-out center. Light Leak only. |
| Midtone | Color | Orange | Main color of the leak. Light Leak only. |
| Fringe | Color | Purple | Color at the faint outer edge. Light Leak only. |
| Flicker | 0 to 1 | 0.35 | How much the leak pulses brighter and dimmer. Light Leak only. |
| Speed | 0 to 4 | 1 | Speed of the pulsing and drifting. 0 holds it still. Light Leak only. |
| Seed | 0 to 100 | 0 | Picks a different pattern of pulsing and drift. Light Leak only. |
| Position X / Position Y (Transform) | 0 to 1 | 0.95 / 0.6 | Where the light comes from. Light Leak only. |
In Light Leak, a Light Leak point handle moves the source and a Spread handle sets the reach on the canvas.
Halftone
Screens the picture into printing dots, lines or crosses, with optional four-plate color separation. Use it for print, comic and poster looks.
Parameters
| Control | Range | Default | What it does |
|---|---|---|---|
| Mode | Dot, Line, Cross | Dot | Shape of the screen. |
| Cell Size | 4 to 64 | 12 | Halftone cell size in pixels. |
| Softness | 0 to 1 | 0.3 | Dot or line edge softness. |
| Mix | 0 to 1 | 0.85 | Blend between the halftone and the original. |
| Contrast | 0.25 to 3 | 1 | Tone contrast before screening. |
| Invert | On/Off | Off | Switches from CMYK ink on white to additive RGB dots on black. |
| Color Split | On/Off | On | Uses separate CMYK plate angles (15, 75, 0 and 45 degrees) for print-style color separation. |
| Angle (Transform) | 0 to 90 | 0 | Screen angle. Has an angle handle on the canvas. |
Topo Contour
Reads brightness as ground height and draws contour lines like a map. Use it for survey map, line art and data-visual looks.
Styles
Each style sets the controls below. The default is Line Art.
| Style | What it looks like |
|---|---|
| Line Art | White contour lines on black. |
| Survey Map | Brown lines with thicker index lines on a height-tinted, hill-shaded map. |
| Ink Print | Dark ink lines with index lines on off-white paper. |
| Overlay | White lines with index lines over the dimmed original picture. |
Parameters
Defaults below are the Line Art style values.
| Control | Range | Default | What it does |
|---|---|---|---|
| Style | Line Art, Survey Map, Ink Print, Overlay | Line Art | Kind of contour drawing. Sets every control to match. |
| Lines | 4 to 120 | 40 | Number of contour levels from the darkest to the brightest part. |
| Smoothing | 0 to 40 | 8 | Smooths the ground before tracing, in pixels at 1080p. Higher gives long flowing lines. |
| Line Width | 0.5 to 8 | 1.4 | Thickness of the lines in pixels at 1080p. |
| Index Every | 0 to 10 | 0 | Every Nth line is drawn thicker, as on survey maps. 0 turns index lines off. |
| Index Width | 1 to 4 | 2 | Thickness of index lines compared with the others. Hidden when Index Every is 0. |
| Invert Height | On/Off | Off | Dark parts become high ground. |
| Shift | 0 to 1 | 0 | Moves every level up or down the slope, so lines slide across the ground. |
| Flow | -2 to 2 | 0 | Keeps the levels moving, in contour intervals per second. 0 keeps them still. The effect animates only when Flow is not 0. |
| Line Color | Single, Picture | Single | Single draws all lines in one color. Picture takes each line's color from the picture. |
| Line | Color | White | Color of the lines. Single only. |
| Background | Solid, Picture, Elevation | Solid | Solid is one color, Picture is the original, Elevation tints the ground by height. |
| Color | Color | Black | Background color. Solid only. |
| Dim | 0 to 1 | 0.5 | Darkens the picture under the lines. Picture only. |
| Low Ground / High Ground | Color | Green / Cream | Tints of the lowest and highest ground. Elevation only. |
| Hillshade | 0 to 1 | 0 | Shades the ground as if lit from the side. Elevation only. |
| Light Angle | 0 to 360 | 135 | Direction the light comes from. Elevation only, with a Light handle on the canvas. |
| Mix | 0 to 1 | 1 | Blend between the original and the contour drawing. |
3310
Shows the picture on a small monochrome phone screen: a low resolution grid of square dark pixels on a green-grey panel, with ordered dithering, ghosting and the faint banding of that display type. Use it for retro mobile and lo-fi looks.
Parameters
| Control | Range | Default | What it does |
|---|---|---|---|
| Dither Mode | None, Threshold, Bayer 4×4 (Authentic), Bayer 8×8, Noise | Bayer 4×4 (Authentic) | How tones become on and off pixels. |
| Contrast Bias | -0.5 to 0.5 | 0 | Threshold bias. Positive is lighter, negative darker. |
| Gamma | 0.4 to 3 | 1 | Input gamma before the tones are reduced. |
| Scale | 8 to 200 | 48 | Screen cells along the shorter edge. Pixels are always square. 48 matches the original phone screen. |
| Pixel Gap | 0 to 0.5 | 0.18 | Gap between pixels as a fraction of the cell. |
| Corner Round | 0 to 1 | 0.3 | Pixel corner rounding, from square to pill. |
| Ghost Level | 0 to 0.5 | 0.08 | How visible the off pixels stay. |
| Pixel Blur | 0 to 1 | 0.25 | Soft pixel edges bleeding into the gap. |
| Fringe Glow | 0 to 0.6 | 0.14 | Darkening of the gap near active pixels. |
| Glow Radius | 0.1 to 2.5 | 0.7 | Spread of the fringe glow, in screen pixels. |
| STN Banding | 0 to 0.35 | 0.05 | Row-to-row brightness unevenness typical of this display type. |
| Vignette | 0 to 1 | 0.3 | Corner darkening. |
| Screen Curve | 0 to 0.3 | 0 | Barrel distortion for a curved glass look. |
| Backlight | 0 to 2 | 0 | Green backlight intensity. 0 is a reflective daylight screen. |
| Ambient Reflect | 0 to 0.6 | 0 | Ambient light washing out the display, like bright sunlight. |
| Transparent Outside | On/Off | Off | Makes the corners outside a curved screen transparent instead of panel colored. Only visible when Screen Curve is above 0. |
| Pixel ON | Color | Dark green | Color of lit pixels. |
| Pixel OFF | Color | Grey green | Color of the panel. |
Thermal
Maps the picture to a heat camera palette, with sensor smoothing, edge emphasis, hotspot bloom, noise and scan lines. Use it for surveillance, night operations and heat map looks.
Presets
The Preset select sets every control, including the heat palette, which is only available through presets. The default is the first preset, a classic iron-style palette (purple through orange to white).
| Preset | What it looks like |
|---|---|
| FLIR Classic (default) | Purple, red, orange and white hot. |
| Night Vision | Green monochrome with heavier noise, scan lines and vignette. |
| White Hot | Greyscale, hot is white. |
| Black Hot | Greyscale, hot is black. |
| Rainbow / Arson | Full rainbow heat ramp. |
| Arctic | Deep blue through cyan to white. |
| Medical Isotherm | Iron palette in stepped bands, sharp and low noise. |
| Hunter Tactical | Dark green through yellow to red hot. |
Parameters
The defaults are the panel's base values. Choosing a preset, or pressing Reset, loads that preset's values.
| Control | Range | Default | What it does |
|---|---|---|---|
| Preset | See above | FLIR Classic | Thermal look. |
| Sensitivity | 0 to 1 | 0.38 | How much color, not just brightness, drives heat. Higher separates materials more. |
| Contrast | 0.5 to 1 | 1 | Contrast of the thermal palette. |
| Gamma | 0.5 to 2 | 0.95 | Gamma on the temperature mapping. |
| Edge Sharpness | 0 to 1.5 | 0.48 | Edge enhancement. Hotter boundaries read clearer. |
| Smoothing | 0 to 1 | 0.32 | Sensor softness. |
| Hotspot Bloom | 0 to 1.5 | 0.58 | Heat glow on the hottest regions. |
| Bloom Threshold | 0.3 to 0.98 | 0.7 | Temperature where the bloom starts. |
| Sensor Noise | 0 to 1 | 0.24 | Sensor noise on the thermal image. |
| Scanlines | 0 to 1 | 0.08 | Horizontal sensor scan artifacts. |
| Vignette | 0 to 1 | 0.32 | Darker edges. |
| Palette Shift | 0 to 1 | 0 | Shifts colors along the heat ramp. |
| Mix | 0 to 1 | 1 | Blend with the original image. |
| Invert Temperature | On/Off | Off | Swaps hot and cold. |
Risograph
Simulates stencil printing with two to four spot inks: separate halftone screens per ink, slight misregistration and paper color. Use it for zine, poster and indie print looks.
Presets
The Preset select sets the ink count, screen, misregistration and all colors. The default is Riso Classic.
| Preset | What it looks like |
|---|---|
| Duotone Zine | Two inks: black and pink. |
| Riso Classic (default) | Teal, orange and burgundy on cream paper. |
| CMYK Print | Four inks: cyan, magenta, yellow and black, finer dots. |
| Neon Punk | Purple, mint and hot pink with strong misregistration. |
| Muted Editorial | Slate, sand and wine with large dots and tight registration. |
Parameters
The defaults are the panel's base values. Choosing a preset, or pressing Reset, loads that preset's values.
| Control | Range | Default | What it does |
|---|---|---|---|
| Preset | See above | Riso Classic | Print look. |
| Ink Count | 2 Inks, 3 Inks, 4 Inks | 3 Inks | Number of ink layers. |
| Dot Size | 3 to 16 | 6 | Halftone dot pitch in screen pixels. Lower is finer. |
| Dot Softness | 0 to 1 | 0.25 | Soft or hard dot edges. |
| Misregister | 0 to 0.04 | 0.008 | Offset of each ink layer, like print misalignment. |
| Misregister Spread | 0 to 1 | 0.5 | Spread of the misregistration direction across inks. |
| Ink Opacity | 0.3 to 1 | 0.92 | Ink density per dot layer. |
| Effect Mix | 0 to 1 | 1 | Blend between the original and the print. |
| Overprint | On/Off | Off | On: inks darken each other where they overlap, like real stacked ink. Off: each ink covers the inks below it. |
| Paper Color | Color | Cream | Paper color. |
| Ink 1 to Ink 4 | Color | Red, blue, orange, teal | Ink colors. Ink 3 appears with 3 or 4 inks, Ink 4 only with 4 inks. |
| Screen Angle (Transform) | 0 to 90 | 15 | Base rotation of the halftone screens. Has an angle handle on the canvas. |
Grid Lights
Turns the picture into a wall of LEDs: each cell lights up with the brightness below it, with domed lenses, halos, sparkle and optional running lights. Use it for stadium screens, signage and light installation looks.
Parameters
| Control | Range | Default | What it does |
|---|---|---|---|
| Cell Shape | Square, Circle (LED), Hexagon, Diamond, Cross/Plus | Circle (LED) | Shape of each light. |
| LED Size | 2 to 20 | 6 | Size of each glowing cell. |
| Gap Size | 1 to 20 | 4 | Spacing between cells. |
| Sensitivity | 0.25 to 2.5 | 1 | How strongly image brightness drives each LED. |
| Threshold | 0 to 0.35 | 0.06 | Minimum brightness before a cell turns on. |
| Glow / Halo | 0 to 1 | 0.45 | Soft halo from lit cells into the gap. |
| LED Dome | 0 to 1 | 0.58 | Convex lens shading on each cell. |
| Sparkle | 0 to 1 | 0.3 | Random brief flashes across the grid. |
| Light Intensity | 0 to 3 | 1 | Final brightness multiplier. |
| Brightness Speed Min | 0.1 to 5 | 0.35 | Slowest twinkle rate. |
| Brightness Speed Max | 0.1 to 5 | 1.1 | Fastest twinkle rate. |
| Use Animation | On/Off | On | Lets the lights twinkle over time. |
| Data Transmission (Running Lights) | On/Off | Off | Sends running light patterns across the grid. |
| Flow Direction | Right, Left, Down, Up | Right | Direction of the running lights. Shown when Data Transmission is on. |
| Flow Speed | 0.1 to 10 | 1 | Speed of the running lights. Shown when Data Transmission is on. |
| Background Color | Color | Black | Color behind the lights. |
Prism Dispersion
Splits light into its colors like glass: red, green and blue separate radially, along a direction or toward the lens edge, with rainbow fringes on contrasty edges. Use it for lens, crystal and chromatic looks.
Presets
The Preset select sets every control. The default is Subtle Lens.
| Preset | What it looks like |
|---|---|
| Subtle Lens | Light lens-edge fringing. |
| Radial Burst | Colors spreading out from the center. |
| Cinematic Shift | A directional color shift. |
| Heavy Prism | Strong prism sweep with off-center optics. |
| Rainbow Edge | Strong lens-edge dispersion with heavy rainbow fringes. |
Parameters
The defaults are the panel's base values. Choosing a preset, or pressing Reset, loads that preset's values.
| Control | Range | Default | What it does |
|---|---|---|---|
| Preset | See above | Subtle Lens | Dispersion look. |
| Mode | Radial, Directional, Lens Edge, Prism Sweep | Radial | How the colors separate. |
| Strength | 0 to 0.04 | 0.012 | Amount of color separation. |
| Spread | 0 to 2.5 | 1 | Multiplier on dispersion distance. |
| Edge Falloff | 0.2 to 3 | 1.4 | How strongly dispersion increases toward the frame edges. |
| Aberration | 0 to 2 | 0.65 | Extra red and blue separation. |
| Iridescence | 0 to 1 | 0.25 | Rainbow fringe on high-contrast edges. |
| Effect Mix | 0 to 1 | 1 | Blend between the original and the result. |
| Center X / Center Y (Transform) | 0 to 1 | 0.5 | Optical center for Radial and Lens Edge modes. Has a Center handle on the canvas. |
| Angle (Transform) | 0 to 360 | 0 | Direction for Directional and Prism Sweep modes. Has an angle handle on the canvas. |
Brick Texture
Rebuilds the picture as a mosaic of small textured bricks in five tone levels. Use it for toy brick mosaics and tiled pixel art.
Parameters
At the top of the settings, a preview shows the brick tile in use. Click Import to load your own tile image (PNG, JPEG or WebP, 128×128 px recommended). Reset next to it returns to the built-in tile.
| Control | Range | Default | What it does |
|---|---|---|---|
| Cell Size | 8 to 64 | 24 | Size of each brick in screen pixels. |
| Hue | 0 to 360 | 112 | Hue of the five-level palette. The darkest level is dark grey. Hidden when Original Colors is on. |
| Saturation | 0 to 1 | 0.78 | Saturation of the brick palette. Hidden when Original Colors is on. |
| Range | 0.3 to 1 | 0.92 | How far the five levels spread from dark to light. Hidden when Original Colors is on. |
| Contrast | 0.5 to 1.5 | 1 | Contrast boost between palette levels. Hidden when Original Colors is on. |
| Dark Threshold | 0 to 0.15 | 0.035 | Brightness below this uses the darkest level as background. |
| Luma Gamma | 0.5 to 2.5 | 1 | Gamma on source brightness before palette matching. |
| Luma Bias | -0.3 to 0.3 | 0 | Brightness offset before palette matching. |
| Shade Amount | 0 to 1 | 0.5 | Subtle shading within each band. 0 is flat. |
| Original Colors | On/Off | Off | Takes colors from the source picture in five brightness bands instead of the hue palette. |