The Node Viewer
Choose what the Node viewer shows, use viewer slots, compare stages, snapshots and variations, edit with handles, check channels and set the canvas size.
These docs cover Dasca 2.3.
The viewer shows one node at full canvas size. Selecting a card never changes what the viewer shows, so you can tune any node while you watch the final result. The toolbar, tools and handles described here are available when the viewer is beside the graph (see Viewer layout).
What the viewer shows
- By default the viewer shows the Output.
- Click the square icon on a card (Show in the viewer) to show that node instead. Click it again, or press
0, to go back to the Output. - Inside a custom node, the viewer shows the custom node's Outputs card unless you show another node there.
The viewer title names what is shown.
Input, Result and Next
Three buttons in the toolbar choose which stage of the shown node you see:
| Button | What you see |
|---|---|
| Input | What goes into the node. |
| Result | What the node makes. The default. |
| Next | The result of the node after it. |
Viewer slots
Slots keep up to five nodes one key away, also from inside custom nodes.
- Select a node and press
Shift+1toShift+5to put it in that slot. The viewer shows it, and its card shows the slot number. - Press
1to5to show a slot. Filled slots also appear as numbered buttons in the toolbar. - Right-click a slot button to clear the slot.
Showing a node with its square icon, or pressing 0, leaves the slot.
Moving around
- Scroll over the image to zoom at the pointer. Drag to pan. While a Group is shown, the left button picks elements, so pan with the middle button or the Pan tool.
- Double-click the image to switch between 100% and fit.
- While the pointer is over the viewer:
Ffits the image,Ctrl+1shows 100%, and=and-zoom in and out.
The bar under the image shows the pixel under the pointer on the left: its position, a swatch and its R, G, B and A values. Over an element it also shows the element's ID, value, size, age and label (see Elements). On the right, the zoom button shows the zoom; its menu has Fit, 50%, 100%, 200%, 400%, Zoom in and Zoom out.
The Mouse node follows the pointer over the viewer, and its Pressed output is 1 while you hold the mouse button.
Compare
Compare splits the viewer: the shown node on the right, something else on the left. Drag the line to move the split. The names of both sides are shown in the top corners of the image.
- Click the compare button or press
Cto turn it on or off. - Open the arrow next to it to choose what to compare with:
| Option | Left side |
|---|---|
| Off | Comparison is off. |
| Previous step | The input of the node that made the shown image, so you see what the last step changed. |
| Slots | A node in one of the viewer slots. |
| Snapshots | A saved version of the graph at the same moment of the animation. See Snapshots. |
Snapshots
A snapshot keeps a version of the graph, so you can try changes and compare or go back.
- Press
Shift+S, or click the camera button in the toolbar and choose Take snapshot. - The list shows each snapshot with a thumbnail, newest first. Double-click a name to rename it.
- Compare with now shows the snapshot on the left and the current graph on the right. Click it again (Stop comparing) to end the comparison.
- Restore snapshot brings the graph back to that version.
Ctrl+Zundoes it. - Delete snapshot removes it.
A snapshot keeps the nodes, wires, custom nodes and keyframes. A project keeps up to 12 snapshots; taking another one removes the oldest. Snapshots are saved with the project.
Variations
Variations show you nearby versions of a look to pick from.
- Select one or more nodes and press
V, or right-click and choose Variations. - The viewer shows a grid: the current look (Now) in the middle and eight variations around it. If the viewer was behind the graph or hidden, it moves beside the graph.
- Click a variation to use it. The grid stays open, and new variations start from your choice. Each choice is one undo step.
| Control | What it does |
|---|---|
| Subtle, Medium, Wild | How far the variations go from the current values. Subtle and Medium change numbers and colors. Wild also changes options and switches. |
| Shuffle | Shows eight new variations. |
| Close | Closes the grid. Esc does the same. |
Variations leave alone settings driven by a wire, settings with keyframes, and settings such as seeds, backgrounds, Mix, Fit, Resolution, Precision, Play sound and Volume. For a custom node, they change the settings shown on its card.
Handles
Many nodes can be edited right on the image. Select one node, and its handles appear in the viewer:
- Shape, SVG Shape, Lottie Shape and Transform: move, scale, set the width and rotate.
- Text: move.
- Gradient: drag the ends, the center or the radius, depending on its Style.
- Polar, and Directional Blur in Zoom and Spin mode: drag the center.
- Particles and Swarm: move and size the emitter. Swarm also has a handle for its pull point when Pull is not 0.
- Attract: move the point.
- 3D nodes: move objects and lights, aim lights and the camera focus. See 3D Scenes.
Hover a handle to see what it does. Shift keeps a move on one axis and snaps rotation to 15 degrees. A handle whose setting is driven by a wire does not move.
View options
The More viewer options button (three dots) has:
| Section | Options |
|---|---|
| Show on the image | Handles of the selected node, 3D camera orbit, 3D lights, and Elements and IDs, which draws the elements and their ID numbers over the image. The first three are on by default; Elements and IDs is always on while a Group is shown. |
| Background | What shows through transparent parts: Checker, Black, Grey or White. This is only for viewing and does not change the result. |
| Channel | RGB, Red, Green, Blue or Alpha. |
| Viewer | Beside the graph, Behind the graph or Hidden. |
While the pointer is over the viewer, R, G, B and A show one channel, and pressing the same key again goes back to RGB. A channel button in the toolbar shows which channel is on; click it to return to RGB. The color channels show the color values as gray, and Alpha shows the coverage.
Canvas size
The canvas size button in the viewer toolbar (or in the top right corner of the graph when the viewer is not beside it) shows the size, for example 1920 × 1080, and opens the Canvas settings:
| Section | What it does |
|---|---|
| Canvas | Formats: Square 1:1, Portrait 4:5, Vertical 9:16, Landscape 16:9, 4K Landscape and 4K Vertical. |
| Source | Makes the canvas follow the size of a File In, Webcam or NDI In in the graph. The size then changes with the picture, and the button shows Source. Click the source again to stop following it. |
| W and H | Type a size from 16 to 8192 pixels. The size applies when you press Enter or leave the field. The link button between them keeps the aspect ratio. |
| Editing resolution | Full, 1/2 or 1/4. Computes the graph at a lower resolution while you work, for speed. The button shows the scale while it is reduced. It is not saved, and export always uses full resolution. |
| Card previews while playing | Live, Every 4th (the default) or Off. How often card previews update during playback. The viewer is not affected. |
The canvas size belongs to the project and also applies inside custom nodes. Each change is one undo step. The default is 1920 × 1080.
Picking elements in the viewer for a Group is described in Groups and picking.